Hydro-Jetting Service

Remove grease, scale, roots, and sludge.

Hydro jetting is a professional, highly effective plumbing technique of clearing clogs and debris buildup on pipe walls throughout the plumbing system by sending high-pressure water jets through the pipes.

The pressure involved in this drain cleaning service is staggering. High-pressure water (up to 4,000 PSI) and flow rates of 2 to 10 GPM through a specialized nozzle is used to scour pipe walls, clearing stubborn debris like tree roots, grease, and mineral buildup. It is a chemical-free, comprehensive, and faster alternative to snaking for cleaning drain lines.

The nozzle may have a different shape or size depending on the drain size or the clog's composition — a chisel-type nozzle, for instance, is useful for cutting through hard blockages like roots or hardened buildup.

Remove pipe clogs

Hydro jetting removes grease, fat, food particles, tree roots (light infiltrations under 2 inches), mineral scale, rust buildup, soap scum, hair, paper products, wipes, and sludge.

This is especially relevant in Las Vegas, which has notoriously hard water that causes heavy mineral/limescale buildup inside pipes over time. Hydro-jetting is particularly well suited to dealing with this kind of scale buildup, penetrating deep into the system to clear even the most stubborn deposits. If you've noticed your water pressure gradually declining or your drains running slower year after year, mineral accumulation from the local water supply is often the culprit, not just grease or debris.

Here's when you should consider drain cleaning service such as hydro-jetting:

• Recurring slow drains that don't respond to snaking or chemical cleaners
• All drains slow in house
• Low water pressure whole house
• Rotten egg smell from sink
• Multiple fixtures draining slowly at once — a sign of a main sewer line blockage
• Sewage smell in house espicially in kitchen or bathroom
• Frequent toilet backups or overflows
• Overflowing drains water backing up into bathtub or toilet is a clear indicator of severe blockage that may require more than traditional snaking.
• Clogged sewer line

Hydro jet drain cleaning is also used as preventive maintenance. Most residential plumbing systems benefit from preventative hydro jetting every 18 to 24 months, though homes with numerous trees or recurring blockage issues may require more frequent attention.

How the Process Works (Step by Step)

A proper hydro-jetting appointment isn't just "stick a hose down the drain." Here's what should happen, step by step:

1. Camera inspection first.
   Before any water is fired, our plumber runs a waterproof CCTV drain camera through the line to locate any major blockages and areas of heavy buildup. At this step we also check the pipe's condition and confirm it can withstand high-pressure jetting. If the pipe is brittle, corroded, or already cracked, hydro-jetting could cause it to collapse rather than clean it.
2. Equipment setup and nozzle selection.
   Iur Technicians select between forward-jet nozzles (designed to break apart solid obstructions) and rear-jet nozzles (designed to scrub pipe walls), matching the nozzle type to whatever type of debris is present.
3. Access the cleanout port.
   Opening an existing cleanout on a drainpipe provides direct entry to the sewer or plumbing main, preventing damage to fixtures and landscaping.
4. Jetting the line.
   High-pressure water is fired through the pipe, comprehensively cleaning the pipe from the inside and blasting away all buildup.
5. Post-jetting inspection
   A final camera check confirms the pipes are clear. After jetting, Nevada Residential Services plumber reinserts the camera to show you that the obstruction has been fully removed — not just punched through. By the way, any plumber who skips this step is cutting corners.

The whole job typically takes one to two hours for a standard residential property.

Hydro-Jetting vs. Snaking

Snaking (drain auger) only punches a hole through a clog. Techniques like snaking often leave some buildup on the pipe walls — because the snake is significantly thinner than the pipe, it can break up the clog's center but has difficulty removing residues from the sides. Hydro-jetting scours the entire interior surface, making future clogs far less likely.

Costs in Las Vegas

The average hydro jetting cost in Las Vegas is $335–$480, but it could vary from $112 to $1200+, based on actual data from 198 completed projects by our plumbers in the Las Vegas area for the last few years. More generally:

• Standard residential job: $350–$600
• Complex or severe blockages (tree roots, deep line): up to $1,200–$2,000
• Camera inspection (often required first): preliminary video inspections cost $275–$500+. Our company include this or offer it at a reduced rate when bundled with jetting.

Here are some pricing factors: severity of clog, pipe accessibility, pipe age/material, and whether it's an emergency drain cleaning call.

Hire Our Qualified Plumber for This Service

hydro-jetting done wrong can crack or destroy your pipes.

Nevada Residential Services Plumbing, Heating and Air Conditioning is:

• Licensed
• Insured
• We use a professional-grade jetter
• We always do a camera inspection before and after jetting
• 600+ Reviews & track record: Check our Google, Yelp, and the BBB.
• Same day service

We offer professional drain and sewer line cleaning services. Kitchen sink won't drain grease? Main drain keeps clogging? Slow drains throughout house? Hair clogged shower drain won't drain? Gurgling toilet when shower runs? Toilet keeps blocking up and overflowing? - We are ready to help! Nevada Residential Services provides a drain/pipe/sewer jetting service in Las Vegas, NV. Give us a call and we will have you covered.

Why it's not a DIY job

Rental hydro-jetting machines do exist, but they're typically underpowered, lack proper nozzle variety, and come with no guidance on pressure calibration for your specific pipe material or diameter.

The equipment itself requires professional training to operate correctly as applying the wrong PSI to older cast iron or clay pipes can fracture them entirely, turning a $400 drain cleaning into a $4,000–$10,000 pipe replacement or yard excavation. A trained plumber also knows how to read a pre-inspection camera feed to identify weak spots, joints under stress, or previous repairs that need to be worked around carefully.

By trying to do it yourself, you'd essentially be guessing. At high pressure, inside pipes you can't see, with equipment you've never used. Attempting it yourself with rental equipment not only risks destroying your pipes, but the nozzles operate at pressures that can cause serious injury without proper training. Always leave this one to a licensed professional. The risk-to-reward ratio simply doesn't make sense.